Recommended Posts

Hi there! 
 

After some time of being out of the hobby I decided to make a come back and start up a terrarium. I managed to get my hands on something like this quite cheaply (the 100cm one), https://www.ebay.co.uk/itm/181856214389

I realise that humidity and temp control will be quite difficult given quite big vents on both sides and so I’m planning on covering them up leaving a small gap for a small desktop fan. 

My question is what can I do about the light? I have a previous experience using T5 tubes on my old terrarium with droseras and pings with some good results. Ideally I’d like to stick to 4x tube set up. However I am struggling to find a decent 4x39w or 45w fixture? Found something like this https://www.ebay.co.uk/itm/184330633910, however I am not really a DIY sort of person so I would struggle making it look decent and work properly :rolleyes: I havent decided yet what I’d want to grow exactly. Still debating between the petiolaris complex family or heliamphoras. 

I want to hang the light unit inside the terrarium so I can use the heat to warm it up without having to use additional heating method. Any ideas? 

 

Link to post
Share on other sites

I decided to go with the Aqualumi Controller to allow me to use a mix of Juwel 35W T5’s and standard 39W. I am struggling to figure out a way of attaching the fixings to the top that will have to be hand made...? 

Link to post
Share on other sites
  • 2 months later...

Little update, so I managed to obtain a used terrarium for quite an attractive price from All Pond Solutions, but it had to be ‘revamped’ as it wasn’t completely suitable for maintaining the right conditions. Plastic vented sides and metal mesh cover. It also came with a stand which is always a bonus :laugh: I used various projects from this forum and also google to help me with choosing the right equipment and the DIY aspects. 

A1EE0465-9E48-4936-BC6C-ADA29F2B01A1.thumb.jpeg.f2b6a3797cd2704571426ff1fdb8c24f.jpeg
 
Initially I was going to just replace the plastic grille on the sides with perspex panels leaving the bottom half, however after much consideration I decided to remove the whole side panels and just replace them with 5mm thick made to measure clear acrylic panels ordered from a local plastic company, with cut out holes for fans and ventilation. 

image.thumb.jpg.ce720f4cf4da1cb9509011ec61c38da8.jpg
 
 
BD9BF966-C4E8-4653-9569-574B8655FBE9.thumb.jpeg.f2126f77f15d8ae352407b8ac36cd102.jpeg
 
I did the same with the lid and ordered a 8mm  thick panel.
 
4FB40508-B9B5-4F45-81BD-366BF1D2D922.thumb.jpeg.cc3d77afa96e41e22463380f0abfff1f.jpeg

476BD271-4BF0-464E-8BD7-B0E5EFD0BCA5.thumb.jpeg.f20b055a7e157b49b026c22e8994b1ab.jpeg
 
99DB8B0E-DF68-4752-A520-31D2E5AE7823.thumb.jpeg.ede33704592463c93f393e2ecb4da551.jpeg
 
9AE79C5E-8603-4E6A-B169-51BD6AE8C837.thumb.jpeg.ae4aa184e4c5ecae2437f1aad3656190.jpeg
 
DD6A7A68-8E3E-407E-8CC9-0A52A123182A.thumb.jpeg.9af0c9b36d750f47bd8c3c5aabd2b5f7.jpeg
 
0C8EE8D8-F678-4A04-804E-E8D3E0FD752B.thumb.jpeg.9d246c3c9f12a46ab8cee796e9aa07db.jpeg
 
0FADD972-206C-4C98-A1A1-31EB1092A9A2.thumb.jpeg.f3265401f91af937b367ef82da2e9c3b.jpeg

I wanted an out of the box light set up as I’m not very good, (read: not good at all) with electronics and I also wanted it all to look nice and neat so after much consideration I decided to go with the Arcadia Jungle Dawn LED Bar 51W. 
 
 
I was debating between this and a relatively new to the market setup, a Polish firm called Skylight www.skylight.blue/terrarium . However, lack of reviews, not the right size, but also predominantly the cost, made me want to pick the Arcadia light instead. I’ll give it few months and see how well the plants do under this light. 
 
I initially stuck mirror tint like foil to the back of the terrarium hoping to hide all the wires, however when I turned the light on, I realised it didn’t exactly go to plan, maybe because it was stuck on inside out. Not really sure... I decided to change it to a reflective diamond sheet from my local hydroponic store. 
 
The temperature inside it I expect it to be consistent with my spare bedroom where its located all year long so 18-23C, especially in winter. Quite honestly, I haven’t got round to buying a hydro/thermometer yet, so at the moment I don’t actually now the exact conditions within the terrarium :laugh:. 
 
Current light time- 13 hours
Internal fans are running at all times and the external ones turn on for 15 minutes in the morning and evening. 
 
There is a fogger inside to provide a cool visual effect in the morning and the evening.
 
And this is the finished product:
 
D4E5860A-EC9E-4CAA-9274-DE34F4A9419A.thumb.jpeg.2dc6808cea65ec1b5f57528ac363df79.jpeg

0901BF02-EDD0-4384-9B30-6678A8C24B71.thumb.jpeg.de99fb1cbd3b5ff396d6709d02f95f95.jpeg
 
31C9C308-7964-4AB1-BDF8-503181018245.thumb.jpeg.62f28ad650a8e0cdbd2642251c76c52f.jpeg
 
F3A3D129-48E6-4DAF-8819-DBCEAE65C208.thumb.jpeg.644cd274fd3a4a0de7da9b89ca11bde7.jpeg
 
In the near future I’m planning on having a cork branch in the back with some epythytic plants mounted on it. 
 
H. Pulchella was the very first resident and has been in it for about a month now. Seems to be enjoying it :smile: 
Day I got her:
2CA8B81A-F998-4DFE-A731-10FDB0E7D405.thumb.jpeg.6b2ed36c6a984624a290350b01f9fa90.jpeg
and today:
DE3A01C0-5DFA-401D-834F-71C45E9E8617.thumb.jpeg.492d69192de906a3f6a9e983dd81a49d.jpeg
 
 
Overall costs:
-Terrarium £60
-Perspex panels cut to size with pre cut holes £98
-AC Infinity fans for ventilation, about £40
-Aquarium silicone, millions of razor blades, duct tape, glue etc about £40
-Arcadia LED Jungle Dawn 51W £78
-Egg Crate/Coral grid about £13 
-Fogger £16
 
Any suggestions are more than welcome :thanks:
Edited by Gekon
Wrong drawing pic insterted
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.