Jump to content

Windowsill nepenthes my solution.


Scotcarnivorousplants

Recommended Posts

So here I was standing in pound land when I came across these little guys. Guess what price they were? Lol

526aac649af785f685e01ccba99afe08.jpg

Anyway, there is a lot of talk on the forum about windowsill nepenthes growing. This is my solution to it. So there are two in one pack with a 12cm pot so this is what I did. I began with a bit of digging around in the greenhouse to find these.

46ed3203a8ac4717883db062479ed45a.jpg

I got the in dobbies sale around Christmas. There are 5 in a pack. What I did was took one of the dishes and pressed it Firmly into the bottom of the pot. This would act as a water tray to increase humidity. 9aedb17c413292117089806f5f042f77.jpg

What I then did was get a 5 cm pot and cut it in half

201c8afabd32e081ab1a19c68adecc30.jpg

I then used the bottom part and glued it to the black tray

3cdfe428b1d2088b23292a832b81426b.jpg

Then I filled with water put the plant on the small 5cm pot and put the lid on. What do you think.

86c26cb91ebcf23d6edf98a73966423b.jpgfba273427b10cdf22b1d8c04547624fa.jpg

Hope it helps

Oliver

Sent from my iPhone using Tapatalk

  • Like 4
  • Thanks 1
Link to comment
Share on other sites

Very nice setup and great looking plant. Only problem I can see with it is, over heating, not a lot of air flow and when the nep out grows its home it to will have to find a bigger enclosure. Great for people with really low humidity and diminutive species. Great bit of diy and find. I'm going to grab some for myself to try a tentactulata in.

Mark

Edited by carni grower
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...