linuxman Posted April 7, 2012 Report Share Posted April 7, 2012 Hi, I'm thinking of constructing a cephalotus tank and was wondering if there's any advice out there? In this thread Martin Hingst uses a 40x25x25cm tank. Is this a reasonable size? Any drawbacks etc? This example is glass but I was thinking of using acrylic sheet cut to size and glued. Does this sound OK? Any suggestions on sheet thickness? Cheers, Quote Link to comment Share on other sites More sharing options...
ada Posted April 7, 2012 Report Share Posted April 7, 2012 The thin acrylic sheet is no good for your tank,its too bendy and can go brittle after a bit.It also scratches easily. Lexan,would be better,its 1/4" thick and you can hit it with a hammer and it wont break,but its expensive and hard to cut to size unless you have a table or wall saw. It still scratches easily too. An old or second hand fish tank would be a lot easier and probably cheaper in the long run,plus you don't have to mess about siliconing it together and it will be well cured and no chance of any chemicals leaching into your compost. ada Quote Link to comment Share on other sites More sharing options...
mobile Posted April 7, 2012 Report Share Posted April 7, 2012 Here's a bad panoramic shot of my tank. It's an 18" glass tank, lit with two daylight CFL. It's still maturing, but the Cephalotus are starting to produce adult pitchers. Quote Link to comment Share on other sites More sharing options...
pmatil Posted April 12, 2012 Report Share Posted April 12, 2012 Very nice mobile! What kind of soil have you got there? And is there drainage of any kind? Quote Link to comment Share on other sites More sharing options...
ada Posted April 12, 2012 Report Share Posted April 12, 2012 Looking good Carl. Are they all seed grown or divisions of the same plant? ada Quote Link to comment Share on other sites More sharing options...
mobile Posted April 12, 2012 Report Share Posted April 12, 2012 Looking good Carl. Are they all seed grown or divisions of the same plant? ada Thanks. There is a mixture of Hummer's Giants, Big Boy and typicals cuttings, plus some seed grown typicals. Quote Link to comment Share on other sites More sharing options...
snowwy Posted April 12, 2012 Report Share Posted April 12, 2012 It will turn out to be a stunning setup after couple of good growing years! Quote Link to comment Share on other sites More sharing options...
mobile Posted April 13, 2012 Report Share Posted April 13, 2012 What kind of soil have you got there? And is there drainage of any kind? The soil it Moorland Gold (reclaimed peat). There is a drainage layer of LECA at the base, which is covered with a weed suppressant fabric, then the Moorland Gold is on top of that. Quote Link to comment Share on other sites More sharing options...
linuxman Posted April 28, 2012 Author Report Share Posted April 28, 2012 This is what I've finally come up with using a 'starter' aquarium. The idea was to create a sort of seepage bog - hence the watering tube. I drilled several holes down its length so all depths get some water. Unfortunately I suspect the holes should have been a tad smaller as the water drains too quickly. Time will tell. I've planted it with 6 of the 'Eden Black' selfed seedlings I've grown. Now I just need to wait 10 years to get a good show. [URL=http://www.cpukforum.com/forum/index.php?app=gallery&image=5012][IMG]http://www.cpukforum.com/forum/uploads/gallery/album_561/gallery_5421_561_345680.jpg[/IMG][/URL] [URL=http://www.cpukforum.com/forum/index.php?app=gallery&image=5011][IMG]http://www.cpukforum.com/forum/uploads/gallery/album_561/gallery_5421_561_505697.jpg[/IMG][/URL] [URL=http://www.cpukforum.com/forum/index.php?app=gallery&image=5010][IMG]http://www.cpukforum.com/forum/uploads/gallery/album_561/gallery_5421_561_378462.jpg[/IMG][/URL] Quote Link to comment Share on other sites More sharing options...
mobile Posted April 28, 2012 Report Share Posted April 28, 2012 Do you have a membrane between the soil and the LECA? My first attempt at a very similar setup (shown above) didn't have one and I found that the soil washed into the LECA, which somewhat defeated the object of using it. I rebuilt mine by placing a weed control membrane between the soil and the LECA, which allows the water to pass through, but not the soil. Quote Link to comment Share on other sites More sharing options...
linuxman Posted April 28, 2012 Author Report Share Posted April 28, 2012 Do you have a membrane between the soil and the LECA? My first attempt at a very similar setup (shown above) didn't have one and I found that the soil washed into the LECA, which somewhat defeated the object of using it. I rebuilt mine by placing a weed control membrane between the soil and the LECA, which allows the water to pass through, but not the soil. Yep, followed your example for that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.